Forum Post: RE: Powerconnect 8024F QinQ Configuration
vlan 211,999 exit stack member 1 2 ! PC8024F exit interface vlan 1 1 exit interface vlan 999 2 ip address 100.0.0.2 255.255.255.0 exit username "admin" password test privilege 15 encrypted !
View ArticleForum Post: RE: PowerConnect 5524 Fault Tolerant Setup
Some model switches have a non-stop forwarding feature that can help with network interruptions during a master failure. However the 5500 series does not offer this feature.
View ArticleForum Post: RE: PowerConnect 5524 Fault Tolerant Setup
Ok that's cleared up a few things. When you mention "edge facing ports" is that referring to ports that are connected to non-networking devices, for example servers and SANs? The firmware might require...
View ArticleForum Post: RE: PowerConnect 5524 Fault Tolerant Setup
Correct, edge ports will basically be any VLAN unaware device. Including Workstations, most servers, printers, some firewalls, SANs.
View ArticleForum Post: RE: Powerconnect 8024F QinQ Configuration
sorry that is not working. What is the output from the command show dvlan-tunnel?
View ArticleForum Post: RE: Accidently Removed Static IP of PowerConnect 5448
You are on the right track, you will need to make that console connection and set the IP address through the CLI. Page 11 of the getting started guide details how to setup that console connection....
View ArticleForum Post: UNKN[112661328]: macal_api.c(844) 385166 List does not exist.
172.21.110.37-1 UNKN[111253440]: macal_api.c(844) 3972835 List does not exist.
View ArticleForum Post: RE: Please Help!! Connecting various Dell switches..
With the 8132 and the QSFP breakout cables, you need to issue a command that will take the 40Gb connection and split it into the four 10Gb connection.
View ArticleForum Post: RE: PowerConnect 5524 Fault Tolerant Setup
You should not see any connectivity loss by changing to portfast. The firmware download includes a PDF with step by step instructions on how to apply the firmware. These instructions are the...
View ArticleForum Post: RE: Accidently Removed Static IP of PowerConnect 5448
Thank you for the quick response. I’ve read both guides and have been working on finding a computer with a com port. Once I find one, I can physically connect the cable without a problem.
View ArticleForum Post: RE: NSeries Console Password
What model of switch are you attempting this on?
View ArticleForum Post: RE: SSH on a PowerConnect 7024
I am not aware of any commands that would achieve this. The latest firmware does include some SSH vulnerability fixes. httpdell.to/2jNo6jZ
View ArticleForum Post: RE: Accidently Removed Static IP of PowerConnect 5448
No need to reboot the switch, once the console connection is made you will be presented with the CLI prompt. Putty is a popular choice and will work for making the console connection....
View ArticleForum Post: Dell X1052 has no community ports?
We want to configure a Dell X1052 switch with private VLANs. The GUI has Port Mode options for Promiscuous and Isolated ports, but not community ports. Is this a feature that is lacking in the X1052...
View ArticleForum Post: RE: UNKN[112661328]: macal_api.c(844) 385166 List does not exist.
What firmware are these switches on? How many switches are producing these messages? Is this a new message or something that has been occurring for a while? Are there any ACLs configured on the switch?
View ArticleForum Post: RE: UNKN[112661328]: macal_api.c(844) 385166 List does not exist.
all switches on our network running version 3.3.5.5 on all switches are producing these messages, we don't have any ACL for MAC address or IP.
View ArticleForum Post: Cannot Console to S4048-on
I am unable to get serial console connection to this model switch. I have tried 2 seperate switches with 2 seperate cables. Using 115200/8/none/1/ no flow Also tried 115200/8/none/1/ no flow This has...
View ArticleForum Post: strange problem with traffic policing - PowerConnect 5548
We have a 8-member PowerConnect 5548 stack - 4 PoE units and 4 non-PoE units. This stack is uplinked to two Cisco ISR routers - a 3900 as primary and a 2900 as secondary with HSRP configured between...
View ArticleForum Post: RE: Accidently Removed Static IP of PowerConnect 5448
Great. I'll give it a shot and report back soon. Thanks again.
View Article