Forum Post: RE: NSeries Console Password
I had a similar experience a while back and could not remember what the fix was. However I do believe that this article helped me to achieve the console password:...
View ArticleForum Post: RE: Accidently Removed Static IP of PowerConnect 5448
This worked. Thank you. For the record, it did not automatically display a CLI, but I was able to use Putty as you suggested. It could be because I reformatted an old laptop with base Windows 7 x86 on...
View ArticleForum Post: RE: UNKN[112661328]: macal_api.c(844) 385166 List does not exist.
Do you have any monitoring software on the network that is poling the switch? The firmware is quite out of date. The newer firmware could provide a possible fix. http://dell.to/2b45NRO Can you please...
View ArticleForum Post: RE: UNKN[112661328]: macal_api.c(844) 385166 List does not exist.
yes we use SolarWinds Network Configuration Manager to monitor it, I will schedule switch firmware upgrade this month.
View ArticleForum Post: RE: Cannot Console to S4048-on
What kind of pinout is on the cable that you are using?...
View ArticleForum Post: RE: Dell X1052 has no community ports?
It does not look like it has the feature, only host and promiscuous. The N2000 looks to be the least expensive switch that has a community port mode.
View ArticleForum Post: RE: is my X1052P switch bricked?
3rd switch bricked. So Dell RMA'd. Which took 2 weeks. Just got the replacement today and tried to upgrade the firmware (because there are functions that I need don't seem to work in the .64 it shipped...
View ArticleForum Post: RE: is my X1052P switch bricked?
Seems to be that they will send me an "up to date" switch because so far no one know when a switch will be bricked. This could take a fewweeks as well. Mexico´s tech support told me that they are...
View ArticleForum Post: RE: is my X1052P switch bricked?
After performing over 2 dozen upgrades and bricking 9 switches, I may have finally come up with an upgrade procedure that works for updating to 3.0.0.82 without bricking - I've successfully upgraded 5...
View ArticleForum Post: RE: Cannot Console to S4048-on
I will look at these thanks. SSH is not enabled, because I cannot access the switch !!
View ArticleForum Post: RE: Cannot Console to S4048-on
I am using the cable that the switch came with so don't think pin outs are the using. Also this cable works with the n2048 switches
View ArticleForum Post: Connect PowerConnect 6248 and Force10 S4810
Hi, I have two PowerConnect 6248 Switches connected with Stacking. Now I want to connect a Force48 S4810 Switch on the same network. Both 6248 have an SFP + module. What is the best way to connect?...
View ArticleForum Post: New N1548p u-boot Menu First start
UBIFS: file system size: 107802624 bytes (105276 KiB, 102 MiB, 849 LEBs) UBIFS: journal size: 5459968 bytes (5332 KiB, 5 MiB, 43 LEBs) UBIFS: media format: w4/r0 (latest is w4/r0) UBIFS: default...
View ArticleForum Post: RE: Connect PowerConnect 6248 and Force10 S4810
For the physical connections, just make sure that the transceivers are the same spec. Do you have part numbers for the transceivers you are using? Or the specs you can share with us?
View ArticleForum Post: RE: New N1548p u-boot Menu First start
Are you able to get to the boot menu for the switch? You may be able to flash the firmware....
View ArticleForum Post: x1026 trunked with Cisco 3750
This is embarrassing. I have multiple Cisco switches at work and home. I have worked with Dell PowerConnects for years. However, this x1026 is kicking my piehole. I need to setup a quad port trunk...
View ArticleForum Post: RE: New N1548p u-boot Menu First start
Hi, I don't have the boot menu. This error happened just before the boot choose. I can't use the boot menu to flash the firmware. I have only the "u-boot Do you know if there is a command to launch the...
View ArticleForum Post: RE: Cannot Console to S4048-on
We have found that by configuring the Putty or SecureCRT with the recommended Console settings, and powering up the switch, the console then works. The trouble will be when trying to access these...
View ArticleForum Post: RE: NSeries Console Password
There is one problem with this. The switch remembers where you are, so if Engineer A attaches via console and is in EXEC mode, then closes the session, and Engineer B attaches via console, Engineer B...
View Article