Forum Post: Dell Enterprise Hardware & Software Updates, November 7-11
PERC H730/H730P/H830 Mini/Adapter /FD33xS/FD33xD controller firmware 25.4.1.
View ArticleForum Post: RE: Copying configuration via SFTP on N-Series 3048P or 4032F
I have not heard anything specific to this firmware and file transfers. It is any transfer that errors out? Or just the startup config? Was this only noticed after updating firmware? Is the second...
View ArticleForum Post: RE: Oversized package
Hi Daniel, the Jumbo Frame was enabled before since it not worket i disabled it again, about the packet capture i do not tried yet and the firmaware is up to date, in those switches we have all IP...
View ArticleForum Post: RE: Oversized package
The default mtu size is 1518 bytes (1522 bytes for VLAN tagged frames). So the VLAN tag should not be making the packet oversized. And if the issue is still happening with jumbo frames enabled, makes...
View ArticleForum Post: RE: Ram memory normal usage on N2048 and N4032
I too have the same issue. We have bought a number of these switches and I have updated them to the latest firmware using Dell Openmanage Network Manager but they all have high memory usage. Is there...
View ArticleForum Post: Open Manage Network Manager
I am using this software for switch management. For the past year, all I have got out of it is backing up the configs of all my switches. I knew that other cool stuff could be done with it and there is...
View ArticleForum Post: RE: Ram memory normal usage on N2048 and N4032
How many switches are exhibiting this behavior? Can you please post up the memory usage being seen? Is this usage something new, or has it been present since deployment? Does this have an impact to the...
View ArticleForum Post: RE: Ram memory normal usage on N2048 and N4032
In my case the switches are 1Gb port switches with very few traffic , all the ports are connected and not even reaching 10% of the bandwidth per port. Could you tell me how much time would take upgrade...
View ArticleForum Post: RE: Ram memory normal usage on N2048 and N4032
A stack will require downtime to update the firmware. Page 31 of this white paper has some info on updating firmware: httpdell.to/20sLnnc The firmware download itself will also include step by step...
View ArticleForum Post: RE: Ram memory normal usage on N2048 and N4032
Thank you Daniel, we know we requiere a downtime during the upgrade, but we need to know how much time would it take this uprade (average minutes/hours ) , we need to request a maintenance window and...
View ArticleForum Post: RE: Ram memory normal usage on N2048 and N4032
It's hard to say exactly how long it will take.The firmware shouldn't take more than a few minutes to apply to the master switch, then perhaps a couple more minutes to sync with the rest of the stack....
View ArticleForum Post: RE: Oversized package
HI Daniel, All those information that you asked before had been made, please check the Log file in attach so there is some detail information about it. best regards,2570.putty.log
View ArticleForum Post: RE: Open Manage Network Manager
Q3: Was one of these switches your core switch? If so, this is probably why. A good portion of the networks traffic will flow through your core switch, and in this case, then be shown on OMNM.
View ArticleForum Post: RE: Oversized package
I suggest performing that packet capture. That will give you insight to the exact information on the packets being received on those interfaces.
View ArticleForum Post: Powerconnect 6248 and sonicwall router TZ300
I have a simple network for a retail shop. I am using a Sonicwall TZ300 router/firewall with a powerconnect 6248 switch. As well as a TP Link 8 port POE switch for my wifi nodes. The network suddenly...
View ArticleForum Post: Failed to acquire an IP address on Vl1; DHCP Server did not respond.
N2024P keep loging this warning. How can I get rid off it. I do not use Vlan1 and switch management IP is on different Vlan which is VLAN100.
View ArticleForum Post: RE: Open Manage Network Manager
I have 2 sites and I have turned Sflow on one of the sites core (N4023f). This sites has about 20 edge switches on it. The other sites has 2 force 10 cores on it. I have not turned on sflow on that...
View ArticleForum Post: RE: Open Manage Network Manager
after a bit of reading I think the reported sampled values is the sample values from the switch set by sflow 1 sampling 1024. The estimated I assume is the calculation from the sampled value which...
View ArticleForum Post: RE: Powerconnect 6248 and sonicwall router TZ300
The TP link and Powerconnect have their own connection to the SonicWall? Or does one plug into the other? A brief topology would help out. Were any recent changes made to the network?
View ArticleForum Post: RE: Failed to acquire an IP address on Vl1; DHCP Server did not...
While you may not be using VLAN 1, is looks like there could still be some configurations for VLAN 1. Could you post up the running configuration? We can help look through it for any suggested changes....
View Article