Forum Post: RE: No PowerConnect 6248 Topology with SolarWinds
These are the OIDs that Solar Winds is looking for. How can I determine if the switches are presenting information on these OIDs? I did an SNMPWalk, but don't really know how to read the output of...
View ArticleForum Post: RE: Flood of %iSCSI-5-ISCSI_OPT_NEW_TCP_CONNECTION errors
I am not sure what those messages specially indicate. They look more informational than anything. How often is the connectivity being dropped? Where is the PS6210 in the network? Does the whole network...
View ArticleForum Post: RE: Unable To Ping More Than 512 Byte
Just to clarify, the RTO messages are only seen when pinging specific servers running Suse? All other devices return a reply? What are you trying to achieve with sending these pings? What model...
View ArticleForum Post: RE: Dell Switch N2048P Flapping ports
I second Josh's suggestion that is seems like a spanning tree issue. Another place to look is duplicate IP addresses. To check for this, record the IP address of the flapping port, then unplug the...
View ArticleForum Post: MSTP / rapid-pvst instances
Hi How many spanning tree instances (MST or rapid-pvst) are supported by N-series switches? I can't find this information in technical specification, Thanks for answering MKSH
View ArticleForum Post: RE: MSTP / rapid-pvst instances
The N-series support 16 instance on MSTP. httpdell.to/2xaBWjF And 64 VLANs with PVST. httpdell.to/2x9OyHL
View ArticleForum Post: RE: N4032 configuration issues/doubts
When you have the switches stacked they will each have the configuration. Page 236 explains the stacking process http://downloads.dell.com/manuals/common/networking_nxxug_en-us.pdf The native...
View ArticleForum Post: RE: Unable To Ping More Than 512 Byte
Thanks for your respond, I've solved it with using dos-control icmp 1024 in switch, I don't know how . But I think the root cause is from the switch And then , wheh we want to check ping with using...
View ArticleForum Post: RE: PowerConnect 6248 - Uploaded firmware not visible in Active...
It seems the interface is what was confusing me. It displays a single line, with the current installed version, and a drop-down list for "image1" and "image2".
View ArticleForum Post: RE: PowerConnect 6248 - Uploaded firmware not visible in Active...
Thanks for the update, glad to hear you got it all sorted out. Cheers
View ArticleForum Post: RE: Unable To Ping More Than 512 Byte
Glad to see you found a command that works. Thanks for the update. Cheers
View ArticleForum Post: RE: N4032 configuration issues/doubts
Yes, the ports which the laptops are connected to have link lights amber and green, and they are on the same vlan, but I can only ping the default gateway. When I ping between laptops I get "Host...
View ArticleForum Post: Settings Jumbo frame on N4064F with mixed port settings
I can see on manual that jumbo frame activation is only global settings and not individual per port "#system jumbo mtu 9216" , and next all ports shows with MTU 9216 My question is would setting will...
View ArticleForum Post: RE: No PowerConnect 6248 Topology with SolarWinds
The MIBs and OIDs are updated automatically alongside the firmware update. There is no provision to separately update the MIBs. Reading the output from the SNMPWalk on this platform is something that...
View ArticleForum Post: RE: N4032 configuration issues/doubts
Trunk mode only connects tagged traffic the laptops are probably looking for untagged traffic. The native VLAN is where unatagged traffic is passed.
View ArticleForum Post: RE: No PowerConnect 6248 Topology with SolarWinds
That's very helpful, thank you. I'll try some SNMPget's and see what I find.
View ArticleForum Post: RE: Received ARP Request on interface Vl1 with bad target IP...
So, how did you fix the ARP broadcast issue with the Ruckus? We are having the same issue.
View ArticleForum Post: RE: Settings Jumbo frame on N4064F with mixed port settings
Globally setting MTU to 9216 should have no impact, or little impact, to devices still sending 1518 packets. During TCP handshake the MSS (Maximum Segment Size) will be set between two devices.
View ArticleForum Post: RE: Enable SSH on Dell Power connect 2848
The 2848 does not have a full CLI. It is mostly managed only through the Web GUI. The CLI can reboot the device, restore to default, firmware updates, create users, set an IP address and create a show...
View ArticleForum Post: Buy High Quality Real/Fakepassports(mazzini865docs@gmail.com),USA...
Buy High Quality Real/Fakepassports(mazzini865docs@gmail.com),USA GREEN CARDS etc Apply for your passport,citizenship,Id cards,driver’s license,diplomas,degrees,certificates service available. And...
View Article