Forum Post: OOB Connectivity Error - VRTX Switch Modules R1-2401
I am in the configuration process of the VRTX. The onboard R1-2401 has been given an OOB ip address of 10.10.10.8 with a default gw of 10.10.10.1. The VRTX switch is uplinked to a Cisco 3850 switch...
View ArticleForum Post: RE: PC 6224 is killing my network. Help? :)
Thanks. The problem returned and I was able to trace the problem to a specific computer and found it was uploading a bunch of files and killing my connection. I limited the upload speed and everything...
View ArticleForum Post: RE: How do you turn off PowerConnect 7048 fan speed warnings?
Good information to have, thanks for keeping us up to date on your progress.
View ArticleForum Post: N2024P reports inline power being off
We have one N2024P that apparently fails to deliver power over PoE. I haven't tested the device myself but I have received reports that PoE device connected to any of the ports won't power up. If I...
View ArticleForum Post: Dell equivalent of Configure Replace available?
As title, was wondering if there was an equivalent of this very useful command set available to power connect switches? Along with an archive, that command allows an admin to roll back any changes made...
View ArticleForum Post: RE: X1026 switch VLAN problem
The default with VLAN 1 works and the computers are all able to talk to each other, but when I set up a new VLAN they were unable to communicate over that new VLAN. They were both placed in ports that...
View ArticleForum Post: RE: X1026 switch VLAN problem
That is very convenient that you had an extra switch to test with. The factory default reset is a good step to take. I would also try flashing the firmware. http://dell.to/2bWqvRH If the behavior...
View ArticleForum Post: RE: PC 6224 is killing my network. Help? :)
Thanks for the update, glad you were able to find the cause. Cheers!
View ArticleForum Post: Set up ssh_key based access to MXL switches. Not "host based."
I've been reading the documentation, and cannot come up with a set of cohesive steps to follow in order to get simple key-based authentication to work, The docs separate this task into a wide variety...
View ArticleForum Post: RE: Set up ssh_key based access to MXL switches. Not "host based."
Can the pub-key-file be created externally and then moved onto the MXL. This is how HP/Aruba is handling this, and it works well. I have multiple users that need access, and I can load their keys into...
View ArticleForum Post: RE: Set up ssh_key based access to MXL switches. Not "host based."
According to the switch itself the pub-key-file is only for use with "host-based" authentication.
View ArticleForum Post: RE: OOB Connectivity Error - VRTX Switch Modules R1-2401
Here are some things to keep in mind in regards to the OOB interface. -The system does not support forwarding IP traffic between In-band and OOB interfaces. -The IPv4 address assigned to the OOB...
View ArticleForum Post: RE: Set up ssh_key based access to MXL switches. Not "host based."
1. Create the user with privilege SN-MXL(conf)#username juser password somepass privilege 15 2. Enable rsa-authentication SN-MXL(conf)#ip ssh rsa-authentication enable 3. Copy your public key to the...
View ArticleForum Post: RE: X1026 switch VLAN problem
I did the reset and updated the firmware and now when I make a new VLAN the computers are able to talk to one another. Thank you for your help and time.
View ArticleForum Post: RE: N2024P reports inline power being off
One of the first things I suggest checking is the firmware. The latest firmware includes some PoE improvements. httpdell.to/2biACE5 What type of PoE device is trying to be powered on?
View ArticleForum Post: RE: X1026 switch VLAN problem
Excellent news! Glad to hear things are now working.
View ArticleForum Post: RE: Dell equivalent of Configure Replace available?
I am not aware of any equivalent commands on the PowerConnect switches. Each config line would need to be manually altered in order to revert the config back.
View ArticleForum Post: RE: Dell equivalent of Configure Replace available?
Thanks Daniel, Its a very useful feature. Be good to see a Dell equivalent.
View ArticleForum Post: MXL - how to get rid of the nag about Support Assist
The SupportAssist EULA acceptance option has not been selected. SupportAssist can be enabled once the SupportAssist EULA has been accepted. Use the: 'support-assist activate' command to accept EULA and...
View ArticleForum Post: RE: MXL - how to get rid of the nag about Support Assist
If this feature is not going to be used, I would try running this command: Dell(conf)# eula-consent support-assist reject Let us know if this helps.
View Article
More Pages to Explore .....