Forum Post: PowerConnect N20xx vlan routing
I did this with the 6224's and 6248's but that PDF document tutorial and how to is pretty straight forward. I don't think the N2000's are the same on the CLI though. Here's part of my config, the "#"...
View ArticleForum Post: RE: PowerConnect N20xx vlan routing
VLAN 1 can be routed, but it still is best practice to not do it. Are both of the VLANs going to be connected to this switch? Is it just the two VLANs that you are using? Assigning an IP address to...
View ArticleForum Post: RE: PowerConnect N20xx vlan routing
I have a switch stack but if I needed to connect via ethernet to anther L2 or L3 switch I have to use a trunk port on the ethernet connected ports right? Thanks for your help!
View ArticleForum Post: RE: Z9100-on remove one PEM don't have alarm
TORSWA01#sho version Real Time Operating System Software Operating System Version: 2.0 Application Software Version: 9.11(2.4) Build Time: Fri Aug 18 03:45:06 2017 But the problem is still there. We...
View ArticleForum Post: RE: Disable "enable" login with TACACS
Authentication methods are now created and applied to the virtual terminal line. Please initiate a separate ssh connection and try login with your tacacs credentials. NOTE:- Before successful testing,...
View ArticleForum Post: RE: Dell 6248: hot swapping and upgrade stack links
Hello, Can I install the stacking modules and reboot the switch at night? Or have I to install it with powerd off switch?
View ArticleForum Post: fortygigabit uplink between N4064 and S4048 links in down state
I cannot turn on the link on the fortygigabit ethernet interfaces between thoose switches. On the S4048 side: Interface fortyGigE 2/49 no ip address mtu 9216 switchport no spanning-tree no shutdown And...
View ArticleForum Post: RE: N1548 as a DHCPv6 relay
I just tried to assemble another lab with a separate N1548 dedicated for testing DHCPv6 relaying. I also was not capable to make it work -- no requests are reaching DHCPv6 server directly connected to...
View ArticleForum Post: RE: N1548 as a DHCPv6 relay
I have not found anything and since you don’t have a Prosupport contract there isn’t software troubleshooting from warranty support.
View ArticleForum Post: Dell N1548P Access list applied to VLANs question
I've created an access-list to control traffic to a specific VLAN in my switch, but it seems as soon as I apply the access-group to the VLAN I seem to lose all ability to communicate to that VLAN, and...
View ArticleForum Post: RE: Dell N1548P Access list applied to VLANs question
Hi, Do the printers have static IP addresses? If they are on DHCP the ACL may be stopping DHCP traffic for them to get an IP address.
View ArticleForum Post: RE: Dell N1548P Access list applied to VLANs question
The printers have a static IP addresses.
View ArticleForum Post: RE: fortygigabit uplink between N4064 and S4048 links in down state
Hi, Are they matching transceiver types? How far apart are the switches? It could be a speed or duplex mismatch.
View ArticleForum Post: RE: Dell N1548P Access list applied to VLANs question
Try adding the ACL to the ports the printers are connected to instead of to the VLAN.
View ArticleForum Post: RE: fortygigabit uplink between N4064 and S4048 links in down state
Yes: Dell Qualified No: Not Qualified N/A : Not Applicable Port Type Media Serial Number Dell Qualified --------- ------- --------------------- --------------------- -------------- Fo1/0/2 QSFP...
View ArticleForum Post: RE: fortygigabit uplink between N4064 and S4048 links in down state
It sounds like the transceiver is working. Are the port settings the same on both switches?
View ArticleForum Post: RE: Dell N1548P Access list applied to VLANs question
Ultimately if I can get the switch to identify the printer / PC / Voip Phone when plugged into the switch, then automatically assign the appropriate VLAN to the port it would simplify things if the ACL...
View ArticleForum Post: unable to upgrade firmware
Hi, we just purchased these Dell X series PowerConnect switches and we decided to upgrade the firmware ASAP since the GUI is really slow and we're not sure if upgrading the firmware can help. Our...
View ArticleForum Post: RE: unable to upgrade firmware
That file does not appear to be correct. Here is the proper firmware download for the X series switch. httpdell.to/2yZNb2X The download includes a PDF that will guide you through the update process,...
View Article