Forum Post: RE: Dell PowerConnect 5324 EOL and EOS
Hi, I was not able to find specific dates, but based on release date, End of life was most likely in 2010. Fee based support should still be available.
View ArticleForum Post: Dell PowerConnect 2824
I have a Dell PowerConnect 2824 24-port 10/100/1000 Gigabit Switch Switch for my household. At seemingly random times, the network freezes and I get no internet access. If I bypass the switch, I can...
View ArticleForum Post: RE: Powerconnect 2824 Mac Based Home Network - Periodically...
Problem Persists. Doesn't show any dropped packets. I am running software version 1.0.0.45 and boot version 1.0.0.13 and Hardware version 00.00.02 Thanks for your help. - Adam
View ArticleForum Post: Dell X1052 routing
Working with a Dell X1052P Switch and trying to get inter vlan netowrking working with the external connection for all vlans on vlan 1. Here's my scenerio ip routing enabled on switch created Vlans...
View ArticleForum Post: RE: Power load
The internal power supply is a 1000w so that plus the MPS should be 2000, the load rating is 80% which brings it to 1800. So you are correct, the 1738 is the combined power.
View ArticleForum Post: RE: Errors detected on stack-port
Is the firmware up to date? Is it just two stacked switches or more?
View ArticleForum Post: RE: Errors detected on stack-port
We are the firmware 6.3.0.19 and there have two switch stacked
View ArticleForum Post: RE: Errors detected on stack-port
Can you do a firmware update? There have been some stacking fixes. httpwww.dell.com/support/home/us/en/19/drivers/driversdetails?driverId=TFK97
View ArticleForum Post: RE: 8132F Firmware Upgrade
The only error we saw for a console connection was a duplicate MAC address on the management interface as they weren't correctly rejoining as a stack but sorted that with a reboot at the same time. Thanks
View ArticleForum Post: RE: N1548 as a DHCPv6 relay
SWITCH1#show ipv6 dhcp traffic ^ % Invalid input detected at '^' marker. SWITCH1#show ipv6 dhcp ? Press enter to execute the command. | Output filter options. snooping Display DHCPv6 snooping...
View ArticleForum Post: RE: Dell 4032 Stack switch hangs!!!!
one question:- we have stack switched do we need to apply new firmware on both switch individually or stack member will take automatically from the master switch?
View ArticleForum Post: RE: How to increase the https and ssh timeout on a Dell X1052 switch
Hi, we have X1052 switches installed and we have problems with disconnecting from our application after approx 10 minutes of inactivity. I found in show ip https this line Interactive secure server...
View ArticleForum Post: RE: N1548 as a DHCPv6 relay
That is odd it shows the command in the list of commands you had when show ipv6 dhcp statistics didn’t work.
View ArticleForum Post: RE: Interactive secure server timeout on X1052
Hi, Unfortunately, there is not a way to change the timeout.
View Article
