Forum Post: RE: Monitorar Switches PowerConnect N3024 em Stack com SNMP
Have you tried using the ip address instead of the hostname in your snmpwalk? I assume you are able to successfully ping 172.17.0.2, and that "ip_switch" is being resolved to the address. Try the...
View ArticleForum Post: Is there any way to disable(shutdown) VLAN interface on Dell N...
In my past experience(cisco world), when I enter interface vlan id mode, I can use shutdown command to disable this vlan interface no matter what the reason is. Of course, I also can use no shutdown...
View ArticleForum Post: Is there any way to disable(shutdown) a vlan interface on N...
Hi All, In my past experience, I could use shutdown / no shutdown command to make vlan interface down / up under vlan interface id mode. Is there any similar command or workaround to achieve this...
View ArticleForum Post: Dell N4032F Po1 Learning to forwarding
each seconde i got in log this : Po1 is transitioned from the Learning state to the Forwarding state in instance 0 Po1 is transitioned from the Forwarding state to the Blocking state in instance 0 I...
View ArticleForum Post: RE: Is there any way to disable(shutdown) a vlan interface on N...
Hi, Did you try no interface vlan?
View ArticleForum Post: RE: Dell N4032F Po1 Learning to forwarding
Hi, It is spanning tree switching, did any of the ports go down when this switched?
View ArticleForum Post: RE: Dell N4032F Po1 Learning to forwarding
Hi Josh, Thank for your response. No, there have no port go down, or flapping on this switch. Thank you
View ArticleForum Post: Switches (Force10 S3124) won't talk to PCs
I have a network that includes 2 switches connected to each other. One goes to the firewall and the other is connected to the 2 PCs. The switches can ping each other back and forth but the workstations...
View ArticleForum Post: RE: Dell N4032F Po1 Learning to forwarding
Page 770 http://downloads.dell.com/manuals/common/networking_nxxcli_en-us.pdf you could try to increase the hello time of spanning tree to see if it will stop switching.
View ArticleForum Post: RE: Switches (Force10 S3124) won't talk to PCs
Hi, Typically PCs need to be untagged ports, try changing them to untagged and see if they will pass traffic.
View ArticleForum Post: RE: Is there any way to disable(shutdown) a vlan interface on N...
no interface vlan command removes entire vlan setting, and then I have to re-create it. What I need is temporary shutdown(disable) the vlan interface. Can this purpose be achieved by N series switch?...
View ArticleForum Post: RE: Is there any way to disable(shutdown) a vlan interface on N...
I do not see any command that allows that.
View ArticleForum Post: Ports acting weird on a 5548P switch
I updated the firmware and boot code on the 5548P and then installed the switch. The next day, everything is working fine but one of the connected printers seems to keep going offline.
View ArticleForum Post: RE: Ports acting weird on a 5548P switch
Since the port doesn’t need PoE you may want to turn it off on that port. Page 160 http://downloads.dell.com/manuals/common/powerconnect-5500-series_ug_en-us.pdf
View ArticleForum Post: VOIP Handset Connection Issues - TCP Traffic Dropping N3048 stack
We are using a stack of three N3048p switches. Out VOIP server is plugged into the stack and all VOIP handset traffic flows through these switches to get to the server.
View ArticleForum Post: RE: Ports acting weird on a 5548P switch
I could disable PoE on that port but I want to avoid that because 10 months from now me, or someone else might wonder why PoE isn't working on a device or something.. Port configuration:...
View ArticleForum Post: Dell PowerConnect 5324 EOL and EOS
We have some Dell PowerConnect 5324 switches at our colocations. As part of an inventory and technology planning for our company, I would like to know the End of Life and End of Support dates for this...
View ArticleForum Post: RE: Monitorar Switches PowerConnect N3024 em Stack com SNMP
I used the IP in the command. Even so, I get time out from the Switch in the commands: snmpwalk -v1 -c public 172.17.0.2 or snmpwalk -v1 -c public 172.17.0.2 .1.3.6.1 I realized that only happens on...
View ArticleForum Post: RE: Monitorar Switches PowerConnect N3024 em Stack com SNMP
If you can ping successfully, it could be the default gateway needs to be set. You will definitely want to check that next.
View Article