Forum Post: 2 N3024 switches VRRP Config questions
First question is that on both of my switches, there is one vrrp address that both switches take master state on, I've tried reloading both switches and I'm not sure why, all of the other vrrps will...
View ArticleForum Post: RE: Powerconnect 8024K blade switch to vsphere vswitch ?
This is the output of the queries on the 2 8024 switches for the currently used interfaces (how do these indicate if the switch is fully used or not?):
View ArticleForum Post: RE: Dell PowerConnect 8024F CPU OIDs
I think the last time I used it on the PowerConnect 8000 series it worked but I'm not exactly sure of the oid. I know it is suppose to work with .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.9 for 1 and...
View ArticleForum Post: RE: 802.1X with MAB on Phone+PC port
I do not see anything in the radius config that should be there that you are missing.
View ArticleForum Post: RE: Powerconnect 8024K blade switch to vsphere vswitch ?
You are not getting any pause frames so it doesn’t look like you are having the connections maxed out.
View ArticleForum Post: RE: powerconnect 2824 VLAN
Hi, You can’t have multiple untagged VLANs on the same ports. VLAN 2 and 3 need to be set as tagged ports.
View ArticleForum Post: RE: 2 N3024 switches VRRP Config questions
What is the firmware version on the switches? There have been a few updates to VRRP in the last few firmware updates. You could try changing vrrp preempt on the one that should be the backup so it...
View ArticleForum Post: RE: DELL N3024F - ARP[ipMapForwarding]
Management Standby Preconfig Plugged-in Switch Code SW Status Status Model ID Model ID Status Version --- ---------- --------- ------------- ------------- ------------- ----------- 1 Stack Mbr Oper...
View ArticleForum Post: RE: DELL N3024F - ARP[ipMapForwarding]
It looks like it is a spanning tree issue. How are the other switches configured? Any spot that could have a loop.
View ArticleForum Post: RE: 2 N3024 switches VRRP Config questions
!Current Configuration: !System Description "Dell Networking N3024, 6.2.6.6, Linux 3.6.5-50bbccb7" !System Software Version 6.2.6.6 Any suggested time for preempt? 60 seconds enough, too much?
View ArticleForum Post: RE: 802.1X with MAB on Phone+PC port
2. What is more, to allow switch (NAS) to communicate correctly with RADIUS (NPS) it is necessary to set in the config of Radius server source ip in EAP packets: (config)# radius-server host auth...
View ArticleForum Post: RE: Dell PowerConnect 8024F CPU OIDs
What I need is non-string values for 1 min and 5 min CPU, so that I could create a custom graph template in Cacti to graphically monitor these values. 2) As I mentioned, the system info on my switches...
View ArticleForum Post: RE: is my X1052P switch bricked?
192.168.12. 141/x10xx-30082/x10xx_boot-10021.rfb destination URL flash://BOOT
View ArticleForum Post: HTTPS on N-series (blank certificate)
(config)# crypto certificate 1 generate (config-crypto)# key-generate
View ArticleForum Post: RE: 2 N3024 switches VRRP Config questions
I would try 60 seconds and shorten if it works.
View ArticleForum Post: RE: 2 N3024 switches VRRP Config questions
It did not work, this one switch seems absolutely infatuated with being the master for this particular vrid
View ArticleForum Post: RE: HTTPS on N-series (blank certificate)
Hi, Did you create the RSA and DSA keys first?
View ArticleForum Post: RE: 2 N3024 switches VRRP Config questions
If you switch the settings for it to be the master of the vrid, does it flip the other way?
View ArticleForum Post: RE: HTTPS on N-series (blank certificate)
I didn't have to generate DSA and RSA keys, because in 6.3.1.8 OS version, SSH is enabled by default (which is in contradiction with User/CLI Guide) and already has crypto keys generated, and SSH works...
View ArticleForum Post: RE: HTTPS on N-series (blank certificate)
Does it give an error if you try to use https?
View Article
