Forum Post: RE: X1018 - Can not ping or route with VLAN 2
Were you able to test out the static routes? That is the only other thing I can think of right now.
View ArticleForum Post: RE: Microsoft NLB on N4000 switches
You are correct, multicast is not supported. I am not aware of any workaround to this limitation.
View ArticleForum Post: RE: Dell PowerConnect 8132
I did not call support yet but how do I private message you? My email is {removed}
View ArticleForum Post: RE: Dell PowerConnect 8132
Phone support is staffed 24x7. You can enter the service tag here: httpdell.to/2f4OnbI And it will provide you with the different methods of contacting support,
View ArticleForum Post: RE: N2000 & N3000 serie SSH stops working after some time
No error messaged have been logged when I accessed SSH (no prompt for username password). Only SSH stop working, Web GUI and telnet can access normally. I tried disabled and re-enabled but still the...
View ArticleForum Post: How to configure a VLAN to accomodate 1000 IPv4 addresses?
I need to configure a VLAN to accomodate 1000 IPv4 addresses on PowerConnect 6224. I created VLAN 20 and went to Routing --> IP --> Interface Configuration and selected the VLAN20. Following...
View ArticleForum Post: Dell Switch How to Kill A Process
Hello, I was wondering how to “kill” process running on a Dell Force 10 s 4810 Switch. As shown below is my problem; Found that sshd on dell switch is using high cpu util.
View ArticleForum Post: RE: Manually configure IP on Voice VLAN
But until we migrate current phones, I cannot activate Global Voice VLAN for entire switch. If I will do that, I think the current phones, Avaya, will take IP from new Voice VLAN which is not...
View ArticleForum Post: Stacked N3024 OOB IP Conflict
Run the Conflict Detect and yup still there. I've made a reservation in dhcp for that mac address to see if it moves but I still don't know why it is even using that address since there is no physical...
View ArticleForum Post: RE: VLANs can't see internet
Daniel, This environment I am trying to create doesn't neccesarily need to have VLAN 1 in the mix. if I can accomplish my goal of having two vlans on the 6224 switch and have the computers in those...
View ArticleForum Post: RE: Monitoring Switch N2048 - GlobalStatus 'non-critical'
Hello, We also have this problem. Did you find solution? Thanks
View ArticleForum Post: RE: N2048 stack randomly fails to reply to SNMP requests (6.3.0.6)
I found an option in Outlook that says "Add properties to document to enable reply with changes". 192.168.1.1
View ArticleForum Post: RE: N2000 & N3000 serie SSH stops working after some time
Thanks for the additional details. This is being looked into internally. There is currently not a workaround/fix that I am aware of. I believe there is a new firmware release in the works, hopefully it...
View ArticleForum Post: RE: Manually configure IP on Voice VLAN
The global config of voice vlan will not affect interfaces that do not have voice vlan enabled on them. For voice vlan to work, it needs to be enabled globally and per interface.
View ArticleForum Post: RE: VLANs can't see internet
console(config)# no ip address console(config)#interface vlan 1 console(config-if-vlan1)#no ip address console(config-if-vlan1)#exit console(config)#interface vlan 99 console(config-if-vlan99)#ip...
View ArticleForum Post: RE: Manually configure IP on Voice VLAN
then, for testing purposes, I will try to manually configure a phone, via webmail..and add all the details regarding SIP, VLAN..... hopefully it will work.
View ArticleForum Post: RE: Stacked N3024 OOB IP Conflict
If you run the command #show ip interface, you will see a list of interfaces and the IP Addresses assigned to them. That would be the first place I would start with. VLANs can have secondary IP...
View ArticleForum Post: RE: Stacked N3024 OOB IP Conflict
From your description above where you say "192.168.0.11 (MGMT LAN)" and then say "192.168.113.160 (Our Internal LAN)", it looks as though you have both VLANs (OOB and in-band) starting with the same 16...
View ArticleForum Post: RE: VLANs can't see internet
Hello Daniel, I feel like a real noob... Thanks for your patience. I reset the switch back to factory defaults. and ran through the setup wizard. I tried to do the command console(config)#interface...
View Article