Forum Post: RE: CWDM SFP on 8024F
I am not able to find any information confirming that these transceivers will work. While testing, I suggest ensuring the firmware is up to date. httpdell.to/2eKovOu
View ArticleForum Post: RE: CWDM SFP on 8024F
I have tested today with one 80km SFP CWDM (Bidirectional, simplex fiber) module made by OVERTEK, and the switch rejects it with some message regardind invalid transceiver inserted (or something like...
View ArticleForum Post: RE: CWDM SFP on 8024F
I am not aware of a compatibility list on our website. Here are the Dell transceivers I show to be compatible with the switch. SFP-1G-SX = GF76J SFP-1G-LX = J6FGD SFP-1G-T = 8T47V SFP-10G-SR= WTRD1...
View ArticleForum Post: RE: CWDM SFP on 8024F
I see your list does not have longer ranges SFP/SFP+ modules (we need both 40KM and 80KM), but do you know any report of users sucessfully using these longer range modules in this switch model?
View ArticleForum Post: Create VLAN on Powerconnect 2848
I have a Powerconnect 2848 and i want to create vlans. So i'm starting as simple as possible: I have set port1 on default PVID 1 and port 2 on PVID 2 In VLAN membership: VLAN ID 1 VLAN ID 2 1 2 1 2 U B...
View ArticleForum Post: Temperature State Change Alarm OID
I'm trying to set up monitoring of some N4000 series open manage switches on PRTG and I think I have found the OID's I need but..... The value for the OID's I have found include this : Temperature...
View ArticleForum Post: RE: Guest WLAN with VLAN (Dell PC 6248)
No, it doesn't help at all. Another Question: Is the configuration of the native VLAN1 the right one? (G22 on "T" and G36 on "Blank")
View ArticleForum Post: RE: Temperature State Change Alarm OID
"Name","Full Name","OID","Type","Access","Indexes","MIB Module","Description" "envMonTemperatureRisingAlarm",".iso.org.dod.internet.private.enterprises.dell.dellLan.
View ArticleForum Post: Stacking N1500 series switches
I am trying to make 4 switches form a stack but with no luck so far. I believe I follow the steps correctly but I really don't know why the rest of them do not add themselves to the stack. If anyone...
View ArticleForum Post: RE: Guest WLAN with VLAN (Dell PC 6248)
One thing that I did not think about until just now. You said when you plugged your workstation directly into the blue connection, it obtained an IP and worked fine? By default a workstation is going...
View ArticleForum Post: RE: Guest WLAN with VLAN (Dell PC 6248)
That was the final hint :D Now it works, thank you! But now i have to configure the other switches with the VLAN 15. I hope, i can get it on my own. If i need any help, i will post here.
View ArticleForum Post: RE: CWDM SFP on 8024F
I apologize, I do not have any documentation on the available dev commands. Some of the newer switches support ZX transceivers, but not the 8000 series. This is just a presumption, but I imagine that...
View ArticleForum Post: RE: Ram memory normal usage on N2048 and N4032
Here is the memory usage of one of our switches in the lab. Total Memory 1032452 KBytes Available Memory Space 296676 KBytes This switch is on firmware rev 6.3.1.8. I agree with Barrett, updating the...
View ArticleForum Post: RE: Dell N4000 spanning-tree issue
Hey Jantorep, I sent you a friends request here on the forums. The request includes my email address and some further info I would like to gather. This extra information will help me look into things...
View ArticleForum Post: RE: x1052p - Console Drivers / Connect to Term Server
I have personally not seen the switches connect to a console server such as the TrippLite. Usually the console is not used, and the management of the switch is done through the management GUI.
View ArticleForum Post: RE: Create VLAN on Powerconnect 2848
The 2848 is a layer 2 switch, it is not capable of routing traffic between two different VLANs. You will need to have a layer 3 device on the network perform the routing between switches.
View ArticleForum Post: RE: Stacking N1500 series switches
Are all the switches on the same firmware? After setting the ports to stack mode and reloading. Are you bringing the Master unit up first, waiting for the master unit to be accessible, and then...
View ArticleForum Post: RE: x1052p - Console Drivers / Connect to Term Server
We decided to return the TrippLite, not only for that reason, but also for general software issues, but I will try to see in the future if a USB-to Serial adapter might work. I did get a Cisco-type...
View ArticleForum Post: RE: Stacking N1500 series switches
In your step 1 I believe you already have the cables connected, whereas in step 4 (where it takes you to another set of steps) it says to wait and cable them together after you have set each switches...
View Article
