Forum Post: RE: Only allow specific IPs on VLAN
Hello! As a summary in case this is relevant for anyone else: I configured one ACL like this: console(config)# access-list test permit ip 192.230.163.0 0.0.0.7 0.0.0.0 255.255.255.255 This will allow...
View ArticleForum Post: RE: Only allow specific IPs on VLAN
Thanks so much for sharing the working config. Really glad to hear the ACL is achieving your goals. Cheers
View ArticleForum Post: RE: Force10 to Themis IPMI Issue
I am not sure that there is a setting on the switch that will make this work, but am happy to help look into things. What model switch are you working with? What model is the server? Does the IPMI...
View ArticleForum Post: RE: Changing Time/Date format in OMNM
There is a time format section in the user guide on page 163: httpdell.to/2wRZI6F Let us know if those steps work for you.
View ArticleForum Post: RE: Force10 to Themis IPMI Issue
The Dell Switch is a Force10 S4810 and the Themis server is RES-XR4-HD. The IPMI does support remote power on and does not need POE to work. I have plugged a regular household linksys switch and also...
View ArticleForum Post: RE: Changing Time/Date format in OMNM
Time Format Settings To set the time display in various locations (alarms, schedules, and so on), set the operating system’s time format as you would like.
View ArticleForum Post: RE: Changing Time/Date format in OMNM
The steps outlined in the example were done through the Windows OS, and not OMNM. My understanding is that OMNM will display the time and date in the same manner as the OS. What OS is OMNM installed on?
View ArticleForum Post: RE: Force10 to Themis IPMI Issue
That is interesting, I wonder is maybe it behaves like WoL and needs to have directed broadcast enabled. By default the switch drops directed broadcast packets destined for an interface. The command to...
View ArticleForum Post: RE: Force10 to Themis IPMI Issue
It gives me an error that the port is not in layer 3 mode. I tried to disable switchport to assign an ip however it makes me remove the interface from both the tagged and untagged vlans. Both of which...
View ArticleForum Post: RE: Force10 to Themis IPMI Issue
Sorry, I may have misunderstood how that feature works. Is the client you are connecting from, within the same VLAN/subnet as the IPMI connection? Or a different VLAN/subnet? Still doing some research...
View ArticleForum Post: RE: Access Error: Data Follows
Hello, i'm found this problem. Because IP Address it's same with Switch Device. Solve by edit Switch IP Address. Nakawut S.
View ArticleForum Post: N2000: Updating CPLD on stack members
Hi! We are managing our switches using OMNM. When updating firmware on these: 1. How important is it to upgrade CPLD as well? - We can do this remote using "update CPLD" and it will perform a reboot....
View ArticleForum Post: RE: N2000: Updating CPLD on stack members
The only way I am aware of updating the CPLD on the stack members is by plugging into the serial cable and running the devshell command. I have not seen any other methods documented anywhere.
View ArticleForum Post: N2000 - Error on stack
Management Standby Preconfig Plugged-in Switch Code SW Status Status Model ID Model ID Status Version --- ---------- --------- ------------- ------------- ------------- ----------- 1 Mgmt Sw N2048...
View ArticleForum Post: RE: N2000 - Error on stack
If you have an extra cable you can swap out, that would be the ideal step to take. If you do not have any extra, then swapping the cable to a different connection would also work. You can then observer...
View ArticleForum Post: vlan access Between Cisco and Dell
Hi, Access between Cisco(2960s) and Dell 6248 Without having any VLAN configuration on Dell switch, How can we access VLANs from Cisco switch? but I can PING (web, ssh) the IP address of dell...
View ArticleForum Post: RE: N2000: Updating CPLD on stack members
Thanks for your reply. I understand that it is recommended to do the CPLD update on all switches. But in the stacks, is it normal procedure to travel around to each site to do the update on stack...
View ArticleForum Post: High CPU usage on CPU management unit
I have a DELL MXL switch, which is showing a high CPU usage on management unit. It shows two processes consuming 92% of utilization. The processes are , "system" and "sysdlp".
View ArticleForum Post: RE: vlan access Between Cisco and Dell
Hi, Both switches have to have a trunk port that passes the VLANs or routing has to be enabled so that they can route to other VLANs.
View Article
