Forum Post: Erratic Connection Issue's
Dell PowerConnect 2748. Firmware: 0.00.33 (2007) Bootcode 0.00.5 (2007) Symtoms: No active connection when exited 'managed mode When IN managed mode, switch works. When connected Cisco NSS 4000, 1Gig...
View ArticleForum Post: RE: Dell switch Multiple vlan's switch ip not communicate
Thanks for reply Daniel, we solved the issue today. we are here using Layer 3 switches, config# ip address 10.8.65.162 255.255.255.240 config#ip default-gateway 10.8.65.161 Config#ip address vlan 3...
View ArticleForum Post: RE: PowerConnect 3524 Can't Access Web GUI
I have tried several different ports and I'm getting the same result. Here is my current running config. I also updated the firmware to the latest version overnight last night using the xmodem feature...
View ArticleForum Post: RE: Erratic Connection Issue's
1.0.00.33 is the latest firmware. You could try booting to the other image, or re-flash the firmware to help rule out the possibility of a corrupt image. Have you looked at the logs on the switches...
View ArticleForum Post: DNS Issue with PC6248
I am having an issue with name resolution on a PowerConnect 6248 specifically around the SNTP function. I have taken the switch down to a very basic config; no VLANs , no routing, just basic IP...
View ArticleForum Post: OpenManage Network Manager : Doesn't Initialize - Fresh Install...
Looks like there is an issues with 6.2 SP3 of OMNM Windows installation. From what I can tell the script to reset the MySql password has failed which is not allowing for anything to initialize....
View ArticleForum Post: RE: DNS Issue with PC6248
Have you considered doing a packet capture on the switch uplink interface? You could then filter for sntp packets and get a better understanding of what communication is taking place.
View ArticleForum Post: interface out of band cannot access
Hi, Has anyone else had problems where the N4064F switch management interface stops working. please advice me Dell Networking N4064F,4 ios 6.2.7.2
View ArticleForum Post: x1052 wont route to router
I installed a Dell switch and can access the internet and everything seems fine but I cannot access anything on the routers network. My routers main network is 192.168.1.x and the router is at 192.168.1.
View ArticleForum Post: LACP
If i configure LACP on L3 switch (gig0/1 and gig0/2), and if these ports are connected to diffrent access switches (SW1 and SW2) ,Does it have any impact ? gig0/1(LACP) ----- gig0/1 trunk (L2 Access...
View ArticleForum Post: RE: interface out of band cannot access
- Was the interface previously working? - Has it stopped working completely? Or more intermittent? - Is anything specific done to bring the interface back online? - When this occurs, what is the...
View ArticleForum Post: RE: x1052 wont route to router
Are all the 192.168.1.x clients you are trying to communicate with attached to the router? Can a VLAN 1 device communicate with a VLAN 2 device if they are both plugged into the X-series switch? Does...
View ArticleForum Post: Reconnect port-channel to VLT
I have a dozen working port channels with the exact same configuration as the one I've recreated, but my new LACP / port-channels do not see one another on their partner switches via VLT.
View ArticleForum Post: Dell Mobile Computing Cart PS2 Managed w/PowerConnect 3548 switch
We currently have purchased several Dell Mobile managed carts that come with a PowerConnect 3548 switch. The premise behind it is to allow us to remotely manage multiple client devices that are in the...
View ArticleForum Post: RE: Reconnect port-channel to VLT
I do not see anything in your configuration that I would suggest changing. Is it possible that the server is not properly configured for LACP? If the server was misconfigured, I would expect the switch...
View ArticleForum Post: RE: Dell Mobile Computing Cart PS2 Managed w/PowerConnect 3548...
From the factory, the PowerConnectâ„¢ 3524/3548 will not have any default IP address assigned. A valid IP address must be assigned via the CLI Interface using a null modem cable. No other management...
View ArticleForum Post: GVRP between 2 Powerconnect Switches
I'm trying to set up GVRP between a Dell Powerconnect 3524P and a Dell Powerconnect 3548P. My eventual goal is to do most of the VLAN configurations on the 3524P and have them propagate all throughout...
View ArticleForum Post: RE: x1052 wont route to router
yes most of the 192.168.1.x clients are attached to the router however i have two hosts on the x1052 using 192.168.1.51 and 192.168.1.52 one is hp ilo and the other dell idrac. I can reach the Hp ilo...
View ArticleForum Post: 7048P Inter-Vlan routing
Hi I have three PowerConnect 7048p layer 3 switches that I recently set up VLANs on. The VLANS are 1,30,40,50,60,70, and 80 respectively. The three switches are connected over fiber and the ports...
View ArticleForum Post: RE: GVRP between 2 Powerconnect Switches
Is there a reason you are using GVRP, typically it is not recommended. You may want to run show gvrp error-statistics and see if it shows any errors. Page 205...
View Article