Forum Post: N4032 Remove all config from a port
Hey Guys Cisco has a command that removes all config from a port only default interface gigabitEthernetx/x Does Dell have any thing like that Rob
View ArticleForum Post: RE: How to find what model / type of GBIC is installed without...
Try using - show inventory media
View ArticleForum Post: RE: ip directed broadcast
Hi, There is not an option for it on this switch, you most likely need a dedicated router and not a switch in routing mode.
View ArticleForum Post: RE: Supported switches for Storage Spaces Direct
Hi, The X4012 should work. I do not see anything that would prevent it from meeting the S2D requirements.
View ArticleForum Post: RE: Bandwidth average on an interrface
There doesn’t seem to be a way to do this within the switch. You may be able to use Openmanage Network manager to get more information. http://www.dell.com/ae/business/p/dell-openmanage-network-manager/pd
View ArticleForum Post: RE: Dell/Force10 S4048-ON LACP Port Flapping Before Reload
Is it just on the LACP ports that go to servers or is it also to ones that go to the 6010s? What happens if you set a static lag instead of lacp? Page 774 http://downloads.dell.
View ArticleForum Post: RE: N4032 Remove all config from a port
Hi, We do not have a command that does this.
View ArticleForum Post: RE: N4032 Remove all config from a port
Ok so if i have a switch port that has 6-9 lines of code, how do i remove it so i can apply a new set of commands Would this not de a good feature ??
View ArticleForum Post: Dell Best Practice Port Config
I have Dell switches, On trunk ports connected to VMware with about 8 vlans is there a best pratice port configuration On Access ports 2 vlans Data and Voice 130-Data 150-Voice is there a best pratice...
View ArticleForum Post: Upgrading firmware on the estate of 160 Dell N2048POE switches auto
Hi, Any good tips, ideas to do this I need to update firmware 160 devices dell N2048POE software ? script ? rob
View ArticleForum Post: RE: Dell Best Practice Port Config
Hi, Access ports are for untagged VLANs, Trunk ports are for tagged VLANs, if all that traffic is tagged they should be trunk ports.
View ArticleForum Post: RE: Dell/Force10 S4048-ON LACP Port Flapping Before Reload
I'm using LACP on the port channels between the 4048 and the 6010 switches. The documentation I have read said that a static lag should only be used for the VLTi links and that LACP should be used for...
View ArticleForum Post: RE: Dell/Force10 S4048-ON LACP Port Flapping Before Reload
I've finally fixed this. The problem was with both the rack switch and the core switch having their LACP config set as 'Active'. Setting one end (the rack switch ports) to 'Passive' was the solution here.
View ArticleForum Post: RE: Upgrading firmware on the estate of 160 Dell N2048POE...
With that many devices you may want to consider a network management tool that monitors and manages all of your N-series switches. OpenManage Network Manager (OMNM) is one such tool that allows you to...
View ArticleForum Post: RE: N4032 Remove all config from a port
The current way is to either use the no command for each command or to import a running-config with the changes.
View ArticleForum Post: RE: Dell/Force10 S4048-ON LACP Port Flapping Before Reload
I am glad that you were able to get it resolved.
View ArticleForum Post: RE: Bandwidth average on an interrface
Hi, Thanks for your reply. I will be see how to use Dell OpenManage Network Manager in my case. Regards,
View ArticleForum Post: type of link between switches for a vlan
hi fellas, I have a question: Should trunk type of link be used for a connection between switches (dell + non-dell) if just one vlan will be on that link? Ports should be in access mode on both...
View ArticleForum Post: Constant Errors: N032.12-1 DRIVER[91422732]:...
The firmware is old but these are critical points and difficult to schedule a reload let alone a FW update in the short term. I have spanned all connections across both switches so can lose 1 at a time...
View Article
More Pages to Explore .....