Forum Post: RE: FCoE and iSCSI priority groups on Force10 MXL 10/40
Here is the i/o module configuration guide http://downloads.dell.com/manuals/all-products/esuprt_ser_stor_net/esuprt_networking/esuprt_net_blade_intercnts/fn-io-module_administrator%20guide3_en-us.pdf...
View ArticleForum Post: Switch X1026P: Remote management by IP
interface vlan 1 no ip address dhcp ! interface vlan 2 name Floor1_DATA ! interface vlan 6 name Floor2_DATA ! interface vlan 8 name Wireless ! interface vlan 10 name Floor3_DATA ! interface vlan 18...
View ArticleForum Post: RE: Switch X1026P: Remote management by IP
Others have tried to move management to other VLANs, but I have yet to see someone report that they have been successful at this. By default the management VLAN is VLAN 1, and I am not aware of any...
View ArticleForum Post: RE: Force10 S50-01-GE-48T-V - SFTOS-->FTOS
Looking back through things, It appears that the wrong image is being used. The proper image should read FTOS-SB-SFTOS-7711_INT.bin. You can download that image after logging into your force 10...
View ArticleForum Post: RE: Force10 S50-01-GE-48T-V - SFTOS-->FTOS
Praise the lord That was it. Thank you for the assistance and hope this helps people in the future.
View ArticleForum Post: Dell PowerConnect 5548P VLANS for VOIP
First off, new to Dell switching and the CLI. Core Switch setup and have VLANs running fine VLAN 2 - switch management 10.6.25.x VLAN 3 - VOIP (not in use yet but DHCP setup on server) 10.6.30.x VLAN 4...
View ArticleForum Post: RE: Dell PowerConnect 5548P VLANS for VOIP
Trunk mode will need to be used for the ports that connect to phones with laptops. The untagged VLAN is for the laptop, and tagged for the phone. Page 468: httpdell.to/24ITi1Q Here is a guide that can...
View ArticleForum Post: RE: Force10 S50-01-GE-48T-V - SFTOS-->FTOS
Excellent! glad to hear that worked.
View ArticleForum Post: RE: Dell N2048, port disables when Open-Mesh A60 Access Point...
I just received a reply from Open mesh that apparently there is an issue with the A60 AP and the Dell N2000 switches... I don't understand how that could be but I will wait for their reply.
View ArticleForum Post: where I can find "ONIE-FTOS-SK-9.10.0.1.bin"?
I got Dell S4048-ON switch. I am student. For my research project, I need to have 10Gbps network switch. After receiving it looks like we need to install OS. I am trying to find way to install "Dell...
View ArticleForum Post: can't see the port memeber in my lag in S4048-ON
Hi I m trying to set up a lag i a vlt domain in two S4048-ON. I have make the following config conf t interface tengigabitethernet 1/1 port-channel-protocol lacp port-channel 1 mode active interface...
View ArticleForum Post: Removing Powerconnect 5548p from stack
I removed a switch from a 3 switch stack and was able to configure it. How do I remove the ports from the remaining 2 switch stack?
View ArticleForum Post: are symptoms where Windows would not keep up, get a new/updated...
on PC62xx I have an IP which would hop (sometimes, a HA) between two MACs and I have a problem with all Windows clients which insist (even after arp -d xx) on show/keeping old(even the MAC is...
View ArticleForum Post: RE: Help Upgrading PowerConnect 6224
I have formatted the filesystem which kept the correct images and also the configuration files. So far it hasn't reboot but I will leave it running for couple of days before I put it back in place....
View ArticleForum Post: RE: Switch X1026P: Remote management by IP
Morning, Is a client on port 5 or 6 able to access the switch GUI using VLAN 20 IP address Yes, only when we are connected on a port in access vlan 20. We need to manage it remotely with Native Vlan on...
View ArticleForum Post: RE: Help Upgrading PowerConnect 6224
Thanks for the update. Glad to hear the format has helped out some.
View ArticleForum Post: RE: Switch X1026P: Remote management by IP
Are clients located on different switches able to access this switch for management? The issue is just seen when trying to access the switch remotely through the router? Can you provide some additional...
View ArticleForum Post: RE: where I can find "ONIE-FTOS-SK-9.10.0.1.bin"?
The FTOS images can be downloaded once you are logged into the Force10 website. httpbit.ly/1MvjZ0X If you do not have an account, you can sign up for one here: httpbit.ly/1KxTLci
View ArticleForum Post: RE: can't see the port memeber in my lag in S4048-ON
Did you issue the command no shut on the physical interface and the port channel?
View Article
More Pages to Explore .....